Manuals / Tripp Lite / Computer Equipment / Power Supply

Tripp Lite SU1500RTXL2UHV, SUINT1500RTXL2U owner manual Basic Operation

Models: SU1500RTXL2UHV SUINT1500RTXL2U SU1500RTXL2U

1 60
Download 60 pages 52.25 Kb
Page 7
Image 7

Basic Operation (continued)

Front Panel Indicator Lights continued

“BYPASS” LED: This yellow light will illuminate to indicate that the UPS’s DC/AC inverter is deactivated and the UPS is in the “Bypass” mode. During normal operation this LED will light briefly when the unit is plugged in, but if an internal fault or overload occurs this light will illuminate constantly to show that connected equipment will receive filtered AC mains power, but will not receive battery power during a blackout. In this case, contact Tripp Lite for service.

“FAULT” LED: This red light will flash when your UPS detects an internal fault (overheating, overvoltages, etc.) or when it detects a wiring fault in your wall outlet (reversed phases, missing ground, etc.) The UPS will only detect wiring faults when it is plugged into a utility outlet but not turned ON. If the light persists after restarting the UPS, contact an electrician to check the AC line. Your UPS will identify the presence of most (but not all) wiring faults.

“LOAD ACTIVE METER” LED: This green light will illuminate when your UPS is receiving AC power to indicate that the set of four dual-function LEDs is displaying the load level of your UPS.

“BATT ACTIVE METER” LED: This green light will illuminate when your UPS is operating from battery power to indicate that the set of four dual-function LEDs is displaying the battery charge level of your UPS. Note: the “ON BATT” LED will also be illuminated.

“OVERLOAD” LED: This red light will illuminate constantly to indicate that your UPS’s capacity has been exceeded while it is in on-line operation. The UPS alarm will beep continuously. Immediately remove overload until light and alarm goes off. If you do not immediately remove the overload, the UPS will transfer from on-line to bypass operation.

“BATT LOW” LED: This yellow light will illuminate when your UPS’s battery charge level is low. The UPS alarm will beep until either the battery charge is depleted or the batteries are adequately recharged.

“ON BATT” LED: This green light will illuminate constantly to indicate that AC line voltage is not present and your UPS is providing your equipment with battery power. The UPS will also beep every two seconds, unless silenced by the “ON/TEST” Switch. When this light is illuminated, you can monitor the battery charge level of your UPS on the “BATT ACTIVE METER” LEDs.

7

Page 6 Page 8
Page 7
Image 7
Tripp Lite SU1500RTXL2UHV, SUINT1500RTXL2U owner manual Basic Operation
Page 6 Page 8

SU1500RTXL2UHV, SUINT1500RTXL2U, SU1500RTXL2U specifications

The Tripp Lite SU1500RTXL2U is a versatile and reliable uninterruptible power supply (UPS) designed to provide protection for critical electronic equipment in various environments. With a power capacity of 1500 VA and a power output of 1000 Watts, this UPS is ideal for small servers, network equipment, and other sensitive devices that require consistent and uninterrupted power.

One of the standout features of the SU1500RTXL2U is its ability to offer extended runtime configurations. The unit includes a built-in battery, but it is also compatible with additional external battery packs that can be connected to prolong the UPS's runtime during power outages. This capability is particularly useful for businesses that cannot afford downtime and require extended periods of operation during an electrical failure.

Equipped with line-interactive technology, the SU1500RTXL2U provides reliable voltage regulation. It automatically adjusts voltage levels to maintain optimal power supply conditions, ensuring that connected devices receive a stable output. This feature significantly reduces the risk of damage from power surges, sags, and other irregularities.

Additionally, this Tripp Lite model features eight NEMA 5-15R outlets, allowing multiple devices to be connected simultaneously. It provides a combination of battery backup and surge protection, safeguarding equipment against potential damage from power spikes or outages. The UPS also includes an LCD screen that offers real-time information on battery status, load capacity, and input/output voltages, enabling users to monitor performance easily.

The SU1500RTXL2U is designed with user-friendliness in mind. Its compact 2U rack-mountable form factor facilitates easy installation in standard network racks or server rooms. The built-in smart management software ensures seamless integration with most operating systems, allowing users to configure settings and monitor the UPS through their computers.

Furthermore, the SU1500RTXL2U is equipped with an automatic voltage regulation (AVR) feature, enabling it to maintain consistent output voltage levels without draining the battery. This not only enhances operational efficiency but also extends the lifespan of the unit's batteries.

In conclusion, the Tripp Lite SU1500RTXL2U is an exceptional UPS solution equipped with essential features that ensure the reliability and stability of power supply for sensitive equipment. Its extended runtime options, line-interactive technology, and user-friendly design make it an indispensable asset for any organization relying on uninterrupted power.