Tripp Lite U244-001-R quick start Installing the Driver, Registration, For Windows Vista users

				.com/warranty Quick Start Guide
Warranty			for		Lite
		FREE
Registration:				Tripp
online		today
register	win.tripplite
	www
to
chance—
product			USB to VGA/DVI

Adapter

Model: U244-001-R

Note: This Quick Start Guide contains only basicinstallation instructions. For more detailed instructions,reference the Owner’s Manual on the CD.

Equipment Connection Warning: Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support equipment or to signifi cantly affect its safety or effectiveness is not recommended. Do not use this equipment in the presence of a fl ammable anesthetic mixture with air, oxygen or nitrous oxide.

Copyright © 2008 Tripp Lite. All rights reserved. All trademarks are the property of

their respective owners.

Installing the Driver

Caution: DO NOT connect the adapter to your computer before installing the driver

Insert the included driver CD into your computer’s CD-ROM drive. The setup program should run automatically. If not, locate and double-click the “Setup.exe” fi le in the “Driver” folder on the CD. Follow the on-screen prompts to complete installation of the driver.

For Windows Vista® users:

•If you encounter the “User Account Control” dialog box upon installing the driver, either enter the administrator password or click “Allow” to continue with the installation.

•If you encounter the driver signature dialog box upon installing the driver, click “Install this driver software anyway” to continue with the installation.

•Restarting your computer is necessary to successfully install the driver. When prompted to restart your computer, click “Yes.” If you are not prompted to restart your computer you should manually restart it.

For Windows® XP users:

•If you encounter the driver signature dialog box upon installing the driver, click “Continue Anyway” to continue with the installation.

For Windows 2000 users:

•If prompted for a system patch after starting the “Setup.exe” fi le, you must download and install the required patch before installing the driver.

•If you encounter the driver compatibility dialog box upon installing the driver, click “Yes” to continue with the installation.

•Restarting your computer is necessary to successfully install the driver. When prompted to restart your computer, click “Yes.” If you are not prompted to restart your computer you should manually restart it.

Connecting the USB Cable to the VGA/DVI Adapter

1.Connect the included USB cable from your computer to the adapter

2.For DVI monitors, connect the adapter to the monitor using a Tripp Lite P560-Series or P561-Series cable (not included).

For VGA monitors, you must fi rst connect the included DVI to VGA adapter to the U244-001-R, and then connect the adapter to the monitor using a Tripp Lite P502-Series or P512-Series cable (not included). Power on your monitor after connecting it to the adapter.

3.Windows Vista and Windows 2000 will automatically complete the installation for you, and the screen from your computer will be displayed on the add-on monitor. If the screen of the add-on monitor is blank, restart the computer. Windows XP will display a “Found New Hardware Wizard.” Follow the steps below to complete the installation on Windows XP.