Triumph Plant 700T manual Proper Usage, Folding, Moving

Models: 700T

1 26
Download 26 pages 44.59 Kb
Page 12
Image 12

PROPER USAGE

Your treadmill is capable of reaching high speeds. Always start off using a slower speed and adjust the speed in small increments to reach a higher speed level. Never leave the treadmill unattended while it is running. When not in use, remove the safety key, turn the on/off switch to off and unplug the power cord. Make sure to follow the MAINTENANCE schedule located on page 25 in this manual. Keep your body and head facing forward. Do not attempt to turn around or look backwards while the treadmill is running. Stop your workout immediately if you feel pain, faint, dizzy or are short of breath.

WARNING

Do not operate the treadmill if the power cord or plug is damaged.

If the treadmill appears to not be working properly, do not use the treadmill.

FOLDING

Firmly grasp the back end of the treadmill. Carefully lift the end of the treadmill deck into the upright position and use the pin to engage and securely lock. Make sure the deck is securely latched before letting go. To unfold, firmly grasp the back end of the treadmill. Gently release the deck pin and carefully lower the deck to the ground.

MOVING

Your treadmill has a pair of transport wheels built into the frame. To move, make sure the treadmill is folded and securely latched. Then firmly grasp the console, tilt the treadmill back and roll.

 

Our Treadmills are heavy, use care and additional help if necessary when moving.

WARNING

Do not attempt to move or transport treadmill unless it is in the upright, folded

position with the lock latch secured. Failure to follow these instructions could

 

 

result in injury.

IMPORTANT PRECAUTIONS INTRODUCTION

ASSEMBLY

BEFORE YOU BEGIN

TREADMILL OPERATION

TROUBLESHOOTING CONDITIONING & MAINTENANCE GUIDELINES

13

LIMITED WARRANTY

Page 12
Image 12
Triumph Plant 700T manual Proper Usage, Folding, Moving