Troy-Bilt 1919 Section Troubleshooting, Problem, Cause, Solution, No AC output is available

Section Troubleshooting

7

TROUBLESHOOTING

Problem	Cause		Solution
	1.	Circuit breaker is open.	1.	Reset circuit breaker.
No AC output is available,	2.	Poor connection or defective cord set.	2. Check and repair.
	3.	Connected device is bad.	3.	Connect another device that is in
but engine is running.
				good condition.
	4.	Fault in generator.	4.	Contact Authorized Service Facility.
When loads are	1.	Short circuit in a connected load.	1.	Disconnect shorted electrical load.
	2.	Generator is overloaded.	2.	See "Don't Overload Generator".
connected, engine runs
	3.	Engine speed is too slow.	3.	Contact Authorized Service Facility.
good but bogs down.
	4.	Shorted generator circuit.	4.	Contact Authorized Service Facility.
Engine shuts down during	Out of gasoline.		Fill fuel tank.
operation.
Engine lacks power.	Load is too high.		See "Don't Overload Generator".

14