Assembly (continued)
Fig.
Cutting Attachment
Locking Rod
Slot
Install the cutting attachment shield mount on the gear housing by installing the three (3) bolts and nuts removed from the old cutting attachment shield with a 7/16 wrench (Fig.
To avoid serious personal injury, always wear gloves while handling or installing the blade.
1.Align the shaft bushing hole with the locking rod slot and insert the locking rod into the bushing hole (Fig.
2.Hold the locking rod in place by grasping it next to the boom of the unit (Fig.
Fig. | Rod |
Nuts |
|
| Cutting Attachment |
Shaft Bushing Hole
Locking Rod Slot
Output Shaft
Gear Housing | Shield |
|
Bolts
Fig.
Cutting Attachment
Shield Mount
Nuts
Fig.
Output Shaft
Bushing
Locking Rod
Fig.
Fig.
9