Troy-Bilt 68J-Horse, E686N-Horse Standard Tilling Tines, Description QTY Custom Tilling Tines

MODELS 682J & E682L

Parts List

REF	PART
No.	No.	DESCRIPTION	QTY.
		STANDARD TILLING TINES
1	1901975	Tine Holder–welded steel, fits
		left or right sides	2
2	710-3096	Bolt–hex hd., 3/8-16 x 2"	4
3	712-3000	Locknut–hex, 3/8"-16

6GW-1270-1A Bolo Tine–single, left hand. Used on left and right side tine assy. Tine is stamped either “EL" or

“AL". (incl Ref 8 & 10, two each) 8

7GW-1270-2A Bolo Tine–single, right hand. Used on left and right side tine assy.

		Tine is stamped either “ER" or
		“AR” (incl Ref 8 & 10, two each)	8
8	710-3005	Bolt–hex hd., 3/8-16 x 1"	16
10	712-0375	Locknut–hex, 3/8"-16	20

---290-253-081 Tine Replacement Kit–unassembled (Incl. eight each of Ref. No.’s 6, and 7, sixteen each of Ref. No.'s 8 and 10). Includes easy-to- follow installation instruction. DOES NOT INCLUDE tine holders, holder mounting hardware, or tine

shaft keys 1

REF	PART
No.	No.	DESCRIPTION	QTY.

CUSTOM TILLING TINES

Special hard-faced, high-chrome carbon alloy tines that are thicker than standard Bolo Tines. These tines better resist the abrasive action of rocky, gritty or sandy soil as compared to standard Bolo Tines, and are especially suited for custom tilling or market gardening.

---GW-10802 Custom Tilling Tine Kit–(Incl. eight each of Part GW-2475-1 and GW-2475-2 tines and sixteen

each of Ref. No.’s 8 and 10 1

---GW-2475-1 Bolo Tine, Custom Tilling–single,

left hand 8

---GW-2475-2 Bolo Tine, Custom Tilling–single,

right hand 8

57