Troy-Bilt TB2BV EC manual

TB2BV EC

2-Cycle

Electric Start Capable

Handheld Blower / Vacuum

Operator’s Manual

Removing Unit From Carton Assemble The Unit

1	2
Remove all contents from	Insert the upper blower
carton.	tube into the blower outlet
	and turn it clockwise until
	it locks into place.
Assemble The Unit	Starting The Unit

3

Install the lower blower tube onto the upper blower tube and turn it clockwise until it locks into place.

40:1

1 Gallon 3.2 oz

4

Mix thoroughly in a separate fuel can:–3.2 fl. oz. of 2-cycle engine oil–1 gallon of unleaded gasolineNOTE: Do not mix directly in the fuel tank.

Tools Required:• Flathead Screwdriver

Handle	Trigger
		Air Filter
On/Off Stop Control		Cover
Cruise Control		Starter Rope

Spark Plug

Upper Blower Tube

Choke Lever

Muffler

Cover

English — Page 1

Primer	Choke Lever
Bulb

Lower Blower Tube

Primer Bulb

10 X

5	16	7	Fuel Cap
			Lower Vacuum Tube
Place the unit on a level	Press the primer bulb 10	Move the choke lever to	Upper Vacuum Tube
surface. Fill the fuel tank.	times, or until fuel is visible.	Position 1.

Starting The Unit

		5 X
18	9	10	11
Crouch in the starting	DO NOT squeeze the	Do not squeeze the	Do not squeeze the
position.	trigger.	trigger. Pull the rope 5	trigger. Move the choke
		times.	lever to Position 2.

Vacuum Elbow

Vacuum Bag Strap

Cinch Strap

Vacuum Bag

Zipper

Français — Page 5

Starting The Unit

3-5 X

12

Do not squeeze the trigger. Pull the rope 3-5 times to start the engine.

13	14
Squeeze the trigger, or	Continue to squeeze the
press down the cruise	trigger. Move the choke
control, and allow the unit to	lever to Position 3. Warm
warm up for 30-60 seconds.	the unit for an additional 60
	seconds. The unit may be
	used during this time.

Need Help?Call 1-800-828-5500

DIDN’T START?

Repeat the starting instructions.

IF engine fails to start after 2 attempts, move choke lever to position 3 and pull the starter rope until engine starts

IF unit still fails to start, refer to theoperator’s manual for additional startingand troubleshooting information

Español — Page 11

IMPORTANT: READ OPERATOR’S MANUAL THOROUGHLY AND FOLLOW THE SAFE OPERATION PRACTICES WHILE OPERATING THE UNIT.

NEED HELP? CALL 1-800-828-5500 IN U.S. OR 1–800–668–1238 IN CANADA

769-07209 P00 06/11