Then use the Printer Manager in the Admintool utility under Open Windows
as follows:
◗Select Edit
◗SelectAdd
◗Select Add Access to Remote Printer
◗At the PrinterName prompt, type any desired name for the print queue
◗At the Printer Server prompt, type:

name

\!

servicename

(for example, LaserJet\!BINARY_P1), where:
-name matches the print server name as entered in the hosts table.
-servicename is the print service name. For binary graphics files use the ser-
vice BINARY_P1; for text files use the service TEXT_P1.
◗Make sure that the Print Server OSis set to BSD (this is the default setting).
◗SelectAdd
◗To print, use the standard lp command; for example:
lp –dLaserJet filename
Notes:
◗We recommend using the /etc/hosts file for the printer name rather than NIS
or other name services.
◗Due to a bug in the Sun lpd implementation on Solaris 2.4 and earlier
releases, may cause problems printing very long print jobs. The workaround
is to configure the EtherWind as an HP JetDirect card using the HP
JetAdmin for UNIX software.
◗Solaris print queues can also be configured from the UNIX shell using the
lpadmin command.
HP/UX Configuration
To configure a print server using HP/UX 10.x, use the sam program and execute
the following steps:
1. When you get a list of options, select Printers and Plotters.
2. Select LP Spooler.
3. Select Printers and Plotters.
4. Select Actions and then Add Remote Printer/Plotter.
5. Enter any name as the Printer Name (this will be the name of the print queue).
6. Enter the IP address of the print server as the Remote System Name.
7. Enter the desired print server service name (BINARY_P1 for binary files or
TEXT_P1 for text files) as the Remote Printer Name.
8. Check the box next to Remote Printer is on BSD System.
7-3