4.Select the desired File server and press ENTER.

5.Select the disk where the print service will reside.

6.Press F10 in response to the message "The service is running but not yet avail- able to users."

7.Type in the maximum number of jobs and maximum size of job for the queue at the Configure Queue screen. Or press F10 for unlimited number and size.

8.If desired choose a default paper format at the Configure Paper Formats screen, otherwise press F10 to select the default settings.

9.If desired enter the authorized user names at the Access Lists screen, or press

F10 for the defaults.

10.At the Add a Destination screen, select PCPrint and press ENTER.

11.At the Destination Attributes screen, enter the StreetTalk name of the print server. Press F10.

12.At the Output Strings screen, press F10 to accept the output string values.

13.At the Enable Strings screen, press F10 to select the defaults.

14.Select NO in response to the message "Would you like to add another destina- tion at this time?"

15.At the Print Queue Status screen, change both values to Yes to enable the print queue to accept and print jobs. Press F10.

16.Press ESCAPE multiple times to exit the Manage utility.

Print Server Configuration

1. Install the XAdmin software from the CD-ROM provided with the print server.

Note: Use XAdmin, not XAdmin32, when configuring a VINES-only network. You can use XAdmin32 on a VINES network only if the PC is running TCP/IP and both the PC and print server have valid IP addresses.

2.Double-click on the XAdmin icon to start the program under Windows.

3.The print server will show up as "XCD_xxxxxx_P1" where "xxxxxxx" is the last six digits of the Ethernet address.

4.Click on the Configure button.

5.Click on the Banyan tab.

6.If necessary change the hop count (default hop count is 2).

7.Enter the StreetTalk name of the print server, this must exactly match the StreetTalk name of the user that was created using the Manage Users utility.

8.Click on the Services tab.

9.Select the desired service to be configured, (default is BINARY_P1).

10.Enter the StreetTalk name of the queue created using the Manage Services utility.

11.Click on OK, and then OK again to save the configuration.

12.Click OK and OK again to exit XAdmin

9-2

Page 39 Page 41
Page 40
Image 40
TROY Group 802.11b manual Print Server Configuration
Page 39 Page 41

802.11b specifications

TROY Group 802.11b is a significant advancement in wireless networking technology, introduced in the late 1990s. Operating within the 2.4 GHz frequency band, 802.11b provided users with robust connectivity and established a foundation for future wireless standards. This protocol marked a transition from wired networking to wireless, enabling greater mobility and flexibility for users.

One of the main features of the 802.11b standard is its data transmission rate, which supports speeds of up to 11 Mbps. While this may seem modest by today’s standards, it was a groundbreaking achievement at the time. The 802.11b technology utilized Direct Sequence Spread Spectrum (DSSS) modulation, which allowed multiple data streams to coexist with minimal interference. This was crucial in environments with numerous wireless devices.

Security was another important consideration, and 802.11b incorporated Wired Equivalent Privacy (WEP) for data protection. WEP attempted to secure wireless transmissions by encrypting data packets, although it was later found to have vulnerabilities. Nevertheless, it was a starting point for securing wireless communication until more robust security protocols, such as WPA and WPA2, were developed.

The compatibility of 802.11b with earlier standards like 802.11 meant that devices could be mixed and matched, allowing for a smooth transition to wireless networks. With a typical range of around 100 to 300 feet, it was suitable for various environments, from homes to offices. In addition, the protocol facilitated peer-to-peer networking, allowing devices to communicate directly without the need for an access point.

In terms of hardware, 802.11b required compatible wireless network interface cards (NICs) and access points. These devices were increasingly integrated into laptops and desktops, leading to widespread adoption and the growing popularity of wireless networking in everyday life.

In conclusion, TROY Group 802.11b laid the groundwork for modern wireless communication. Its features, including data rates of up to 11 Mbps, DSSS modulation, and initial security measures like WEP, made it a pioneer in the industry. Although it has been succeeded by faster and more secure protocols, the legacy of 802.11b lives on as a crucial development in the evolution of wireless technology, setting the stage for the high-speed and secure connections that users enjoy today.
Top Page Image Contents