2.You should see the Discover icon. If you don’t, scroll down by clicking on the scroll bar arrows on the left side of the screen. Click the Discover icon.
3.Click the Inquire button. You get a message “starting inquiry” and then a list of addresses of available WindConnect Bluetooth Print Adapter devices and other devices. The WindConnect Bluetooth Print Adapter address will appear in the format 004017xxxxxx; this is printed on the WindConnect Bluetooth Print Adapter box (all WindConnect devices begin with 004017). Click the address of the device you want to use. If you don’t see the WindConnect address, you may need to move to a different location, click on the Home icon (the picture of the house) and go back to step 2.
4.Click the Discover button. You will get a message "discovering". If the dis- covery process is successful, you get the message “found service”, and the WindConnect Bluetooth Print Adapter address should now appear with a P1 next to it. If this fails, you may need to move to a different location, click the Home icon (the picture of the house) and go back to step 2.
5.Click the address of the WindConnect Bluetooth Print Adapter (it will be high- lighted).
6.Now click the Home button (the picture of the house).
Printing from the PDA
To print from the Handspring Visor to a printer connected to the WindConnect Bluetooth Print Adapter you will need a
The following are the steps for setting up the PrintBoy software. Note that you only need to do the setup procedure one time
1.Click the PrintBoy icon (if necessary, scroll down).
2.Click the Setup button.
3.Click the Edit button and note the Technology setting. If it is on Serial, skip to the next step. If it is IrDA, click on the adjacent down arrow and change the setting to Serial. Note that the Comm. Speed setting does not matter.