4 | Using the |
Serial Port |
The WindConnect has an
RJ45 |
|
| DTE | DCE |
pin | Signal | Signal | pin | pin |
1 | RTS out | CTS in | 5 | 4 |
2 | DTR out | DSR in | 6 | 20 |
3 | Transmit Data | Receive Data | 3 | 2 |
4 | Transmit return | Signal Ground | 7 | 7 |
5 | Receive Return | Signal Ground | 7 | 7 |
6 | Receive Data | Transmit Data | 2 | 3 |
7 | DSR in | DTR out | 20 | 6 |
8 | CTS in | RTS out | 4 | 5 |
In most cases, you will need an adapter cable in order to use the serial port. TROY offers the
Pin 2: Black | Pin 3: Yellow | Pin 4: Blue |
Pin 5: White | Pin 6: Brown | Pin 7: Green |
Pin 20: Orange | (Red is not used) |
|
TROY also offers the
Pin 2: | Yellow | Pin 3: Black | Pin 4: Orange |
Pin 5: | Green | Pin 6: Brown | Pin 7: Blue |
Pin 8: | White | (Red is not used) |
|