JVC TK-C553 manual
Video signal cables,
Control signal cables

INSTALLATION

Connections to Camera Terminal Board (Continued)

Meshed wire Polyethylene

	Core
	conductor
12mm	6mm

Fold the meshed wire back.

Video signal cables

Connect the coaxial cables to the video signal output terminals. Treat the tips of the coaxial cables as shown on the left before connection.

Note

Use the 3C-2V or 5C-2V video signal cable (coaxial cable). The 7C-2V cannot be used.

ATX+

BTX-

CRX+

DRX-

Connect to the other side in pairs like this.

Connect to the other side in pairs like this.

Control signal cables

These cables should be connected only when it is required to control the cam- era using the RS-442A or RS-485 sig- nals. The use of 0.65 4-conductor twisted pair cables is recommended. With these cables, the maximum exten- sion distance is 1,200 m.

After having connected all of the re- quired cables, again attach the termi- nal board cover.

Forgetting to attach the terminal board cover could result in accidents or injuries.

16