10
8Terminal board
To connect the coaxial cable used as the
video signal cable, the power cable,
control signal cable, etc.
(See page 15)
9Video output terminal
Outputs composite video signals (1 V
(p-p), output impedance 75Ω).
Should be connected to video input
terminal on monitor, switcher, or remote
control unit.
10
Control signal connection terminals
Terminals for inputting signals with
electrical characteristics conforming to
the EIA/TIA RS-422A or RS-485 standard.
Connected to the optional Remote
Control Unit RM-P2580, etc.
11
DC 12 V / AC 24 V input terminals
To input DC 12 V or AC 24 V power.
The AC 24 V power supply should
conform to the following:
U-type: Class 2 only
E-type: Isolated power supply only
12
Terminal board cover
Protects the cable connection terminals
from dirt, etc.
13
Camera body mounting guides (× 3)
To be inserted into the guide holes of the
ceiling mount.
14
Drop prevention wire hook
Attach the drop prevention wire to this
hook.
15
Camera positioning alignment mark
When mounting the camera onto the
ceiling mount, align this mark with the
mark on the mount.
Controls, Connectors and Indicators

Camera Body

12 13
13
13
14
8
10
9
11
15

Body Underside

(Condition with terminal board attached.)