JVC TK-C553 SPECIFICATIONS

43

CAMERA

Signal system: U type based on NTSC

standard

E type based on PAL stan-

dard

Image device: 1/4” IT CCD

Effective picture elements:

U type 380,000 pixels,

768 (H) × 494 (V)

E type 440,000 pixels,

752 (H) × 582 (V)

Sync system: Line lock/Internal

Video S/N: 50 dB (AGC OFF)

Horizontal resolution:

470 TV lines (Typ.)

Minimum illumination:

4 l× (Full wide angle, AGC

20 dB, Y: 25%)

1.5 l× (Full wide angle,

AGC 20 dB, Y: 25%, no

cover)

Camera ID: 24 letters

White balance:ATW/Manual/AWC

(one-push white balance)

Color temperature range

2500K to 8000K.

Backlight compensation:

Available by adjustment of

light metering area posi-

tion.

LENS

Focal length: 2.6 mm to 6 mm (variable)

Max. aperture ratio:

F1.2 to F1.8

Angle of vision:

f = 2.6 mm

82° (H) × 59° (V)

f = 6 mm

35° (H) × 26° (V)

SPECIFICATIONS

��GENERAL

Remote control input:

RS-422A or RS-485

(non-isolated) connector

Baud rate: 9600 bit/s

Power requirement:

AC 24 V ` 50/60 Hz or

DC 12 V

Power consumption:

U type Approx. 3.6 W

E type Approx. 300 mA

Mass: 570 ˝ (including ceiling

mount)

Operating temperature:

–10°C to 50°C (recom-

mended: 0°C to 40°C)

Dimensions: Approx. 112 mm diam-

eter × 113 mm

Accessories:

U type E type

• Instructions × 1 • Instructions × 2

• Ceiling mount × 1 • Ceiling mount × 1

• Terminal board × 1 • Terminal board × 1

• Warranty card × 1

•Service information

card × 1

External dimensions [Unit: mm]

•Design and specifications are subject to

change without notice.

Angle adjustment range:

Horizontal: 90°

Vertical: 130°

Tilt: 30°

H=113

SR52

φ112

φ110

φ106

Contents

Main TK-C553 COLOR DOME CAMERA IMPORTANT SAFEGUARDS Page Safety Precautions Thank you for purchasing this product. (These instrustions are for TK-C553U and TK-C553E) CONTENTS Controls, Connectors and Indicators Features Operating Precautions Precautions for Use with the RM-P2580 Safety Precautions Camera Body Controls, Connectors and Indicators Body Surface Page Controls, Connectors and Indicators Camera Body 15 11 13 Ceiling Mount SYSTEM System with Remote Control Unit RM-P2580 System with up to 8 cameras. (Six position settings available for each camera.) Time lapse VCR COM Page Settings CAMERA FACE Menu Screen Settings COMMUNICATION menu screen FUNCTION menu screen SYSTEM System with Remote Control Unit RM-P2580 Connections to Camera Terminal Board Remove the terminal board cover by flipping it up while pushing its top to the left. Connections to Camera Terminal Board (Continued) A TX+ B TX- C RX+ D RX- Ceiling Installation Ceiling Installation (Continued) Adjusting the Camera Angle Horizontal rotation (adjustable range: 90) 3. 2. 1. Adjusting the Camera Angle (Continued) 2.2. 1. Attach the dome cover. Connection for Adjustment of the Camera * The power to the camera body must be ON when adjustments are performed. SETUP MENU Flow SETUP MENU flow when the operation buttons on the camera body are used SETUP MENU Flow (Continued) SETUP MENU flow when commands are transmitted from the RM-P2580 Menu Settings Using the Operation Buttons on the Camera Body 5. VIDEO ADJUST screen Menu Settings Using the RM-P2580 RM-P2580 7. 3. 6. SETUP MENU Screen VIDEO ADJUST Screen VIDEO ADJUST Screen (Continued) MODE SELECT Screen COMMUNICATION Screen FUNCTION Screen BLC (Back Light Compensation) Adjustment SET button RM-P2580 RM-P2580 CAMERA/POSITION User Settable Light Metering Areas Manual Adjustment of White Balance VIDEO ADJUST screen Manual Adjustment of White Balance (Continued) WHITE BALANCE AWC (One-push Auto White Balance) Adjustment CAMERA TEXT Setting KEY LOCK WER ALARM RM-P2580 Page AUTO START DEMO MODE SELECT screen POSITION TEXT Setting (RM-P2580) KEY LOCK WER PO POSITION TEXT Setting (Continued) AUTO PATROL Setting KEY LOCK WER PO ALARM AUTO PATROL Setting (Continued) CAMERA LENS SPECIFICATIONS GENERAL External dimensions [Unit: mm]