READ ME FIRST
Product Installation Instructions
(For use with TROY MICR / IRD 2300, 4200, and 4300 Security Printing Solutions)
Introduction
Your TROY Security Printing Solution offers value-added functionality and the flexibility to integrate smoothly with your check-printing system. Use the TROY Security Printing Solutions CD to install the necessary Hewlett-Packard LaserJet printer drivers and TROY support files. To ensure successful software installation, perform the following steps in sequential order. The documentation and installation files contained on the TROY Security Printing Solutions CD will be needed in the event that your TROY Security Printing Solution is reinstalled in a new location or after service has been performed. In order to best install and setup your new TROY product, use this Quick-Start Guide and the Hewlett-Packard Getting Started Guide.
Package Contents
•TROY Security Printing Solutions CD
•TROY Security Printing Solutions Information Sheet
•TROY Software License Agreement
•TROY MICR Document Template
•TROY Security Printing Solutions User’s Guide (provided in PDF format on the CD)
•TROY MICR Basics Handbook (provided in PDF format on the CD)
•TROY Security Printing Solutions Quick-Start Guide (this document)
IMPORTANT: If you purchased a TROY DIMM Solution, please refer to the DIMM installation instructions provided with the TROY product to install the DIMM into your Hewlett-Packard LaserJet printer before proceeding with these setup instructions. After the TROY DIMM has been installed in your printer, proceed to Step #2 in this document to install the required TROY support files. In addition, a MICR toner cartridge must also be installed in your printer to print MICR documents using the TROY DIMM Solution.
STEP 1: Unpack / Setup the TROY Security Printing Solutions Printer
1.Follow ONLY the unpacking and setup procedures described in the Hewlett-Packard Getting Started Guide (supplied in this startup package for TROY Security Printing Solutions printers only), and then proceed to step #2 to install the appropriate PCL 5e printer driver provided on the TROY Security Printing Solutions CD. Do NOT use the Hewlett-Packard CD to install the printer software for this installation process.
2.Be sure to install the TROY MICR toner cartridge (supplied with TROY Security Printing Solutions printers only) in the same manner as described for the standard toner cartridge. The TROY MICR toner cartridge must be installed in your TROY printer or Hewlett-Packard printer to print MICR documents.
Security Printing Solutions