True Food Service Equipment, Inc.
MAINTENANCE, CARE & CLEANING
MAINTENANCE, CARE & CLEANING
CLEANING THE CONDENSER COIL
When using electrical appliances, basic safety precautions should be followed, including the following:
REQUIRED TOOLS:
• Phillips Screwdriver
• Stiff Bristle Brush
• Adjustable Wrench
Step 1
Disconnect power to unit.
Step 2
Take off lower grill assembly by removing four
(4) corner screws.
Step 3
Remove bolts anchoring compressor assembly to frame rails and carefully slide out. (tube connections are flexible)
Step 4
Clean off accumulated dirt from the condenser coil and the fan with a stiff bristle brush.
Step 5
After brushing the components off vacuum all dirt residue from the coil, fan, and surrounding areas.
Step 6
Replace cardboard cover. Carefully slide compressor assembly back into position and replace bolts.
Step 7
Reinstall louver assembly into unit with appropriate fasteners and clips. Tighten all screws.
Step 8
Connect unit to power and check to see if compressor is running.
5 - 1227
14 | www.truemfg.com | 14 |
