TTE Technology L22HD32D owner manual Setting the picture size, Film Mode

Setting the picture size

You can view 480i and 480p format programs in a variety of picture sizes— Natural, Cinema Wide1, Cinema Wide2 and Full.

Selecting the picture size

1Press SETUP/TV MENU in the TV mode. The TV menu screen will appear.

2	Press	or	to select “Picture”, then press or
	ENTER.
3	Press	or	to select “Picture Size”, then press

or ENTER to display Picture Size menu. Press

/or corresponding Number buttons (0-3) to select the desired picture size, as described below.

Picture Size

0.Natural

1.Cinema Wide1

2.Cinema Wide2

3.Full

[0-3]:Select

NOTE:

•Selectable picture sizes may vary depending on the input source or broadcast signal.

•Picture Size menu also can be displayed by pressing SCREEN SIZE on the remote control.

4Press EXIT/CANCEL to return to the normal screen.

Natural picture size

In some cases, this image will display the size of standard 4:3 with a black side bar.

Cinema Wide1 picture size (for 4:3 format programs)

To fill the screen, the right and left edges are extended,

however; the center of the picture remains near its former ratio.

The top and bottom edges of the picture may be hidden.

Cinema Wide2 picture size (for letter box programs with subtitles)

To fill the width of the screen, it is extended horizontally. However; it is only slightly extended at the top and the bottom.

The top and bottom edges of the picture may be hidden.

A B C D E F G - - - - - - - - - - - - - - - -

A B C D E F G - - - - - - - - - - - - - - - - - - - - - - - - - -

Full picture size (for 16:9 source programs)

Full will display the picture at the maximum size.

NOTE:

•Some High Definition and/or Digital broadcasts may not allow you to change the picture size.

•In HDMI or COMPONENT mode with a scanning rate of 720p or 1080i, only the Full picture size feature is available.

•In PC Mode, only the Natural and Full picture size features are available. Additionally this feature will not work when display mode is WXGA.

Film Mode

A smoother motion may be obtained by setting the Film Mode to “On” when you view a DVD.

1Press SETUP/TV MENU in the TV mode. The TV menu screen will appear.

2 Press			or	to select “Picture”, then press or
ENTER.
3 Press			or	to select “Film Mode”.
Press			or	to select “On” or “Off”.
	Picture
		Picture Setting		>>
		Picture Preference		Sports
		Picture Size		>>
		Film Mode		On
		PC Setting		>>
		DNR		On

: Select : Adjust

4Press EXIT/CANCEL to return to the normal screen.

22

51H0101A_eng.indd 22

08.3.7 5:39:18 PM