TTE Technology L22HD32D owner manual To connect a Hdmi or a DVI device to the unit, Tv/Dvd

Connections to other equipment (continued)

To connect a HDMI or a DVI device to the unit

The HDMI input receives digital audio and uncompressed video from a HDMI device or uncompressed digital video from a DVI device.

When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate analog audio cords required.

Rear of the unit

To PC/DVI AUDIO IN

To HDMI/DVI IN

To HDMI out

HDMI cable (type A connector)

(not supplied)
HDMI - to - DVI adapter cable	or
(HDMI type A connector)
(not supplied)

Audio cord (not supplied) To DVI output

HDMI device

DVI device

NOTE:

•When using HDMI/DVI to connect your HDMI or DVI devices, you must select the corresponding audio input source (HDMI or DVI) on the menu screen (see ”Selecting the HDMI audio input source” on page 24). Otherwise you will only see the image with no sound.

•If you connect an external component (cable box, satellite receiver, etc.) to this LCD TV using an HDMI cable or a DVI to HDMI cable, the image will not display if the output resolution of the component is set to 480i. To receive the picture you must change the output resolution on the external component.

Should you require further instruction, please contact the manufacturer of the external component.

Using an AV Amplifier with built-in digital surround

If you are using an Amplifier with built-in digital surround sound, you can enjoy various audio systems including Dolby Digital Surround audio that sounds just like the movie.

Connect an AV amplifier with built-in Dolby Digital decoder, DTS decoder, or MPEG decoder etc. as shown below.

Rear of the unit

Coaxial Digital

Audio Output

Coaxial digital cable (not supplied)

To Coaxial

Digital Audio Input

AV Amplifier with built-in digital surround decoder as listed above

Front

Speaker

Subwoofer (Right)

TV/DVD

Front

Speaker

(Left)

	Center Speaker
Surround	Surround
Speaker (Left)	Speaker
	(Right)

NOTE:

•When you are viewing digital broadcast, this unit will not work in conjunction with DTS audio or MPEG audio. There will be no sound output if connected to an AV amplifier with a built-in DTS decoder or MPEG decoder.

•Coaxial digital audio output is active only when receiving digital broadcasting, not when receiving analog broadcasting.

37

51H0101A_eng.indd 37

08.3.12 4:51:08 PM