![](/images/new-backgrounds/1143996/14399625x1.webp)
user manual
LMS-D4
3.Scroll to set the nearest lower voltage to the calculated value in the limiter screen for that loudspeaker model (or frequency band as appropriate), and press ENTER. Refer to the limiter voltage lookup table in Appendix A for a range of approximate conversion values.
In addition to those values, the limiters can also be defeated (OFF displayed on the screen). Please note that this setting should be used only if the amplifiers already have internal limiters or soft clipping circuitry.
5) Channel Gain
OP1+3 Sub
Gain = 4.0 dB
Set the gain of the specified output channel relative to the other channel(s). Available values are from +6.0 to
6) Polarity
OP1+3 Sub
Polarity = Normal
Define the polarity of the specified output channel. The value can be normal or inverted.
7) Delay