Turning Technologies 1850, 2850 manual Remove the front-fan tray

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

Figure 1-3. Removing the System Board

system board

retention pin

slots

tabs

drive-bay retraction bar

17Remove the front-fan tray:

a Press and hold the front-fan tray release button. b Slide the front-fan tray to the right until it stops. c Lift the front-fan tray from its three securing posts.

18To remove the system board:

a Lift up the blue retention pin and slide the system board towards the front of the system to disengage the board from the retention tabs on the chassis. See Figure 1-3.

b Raise the back edge of the board slightly to clear the chassis, then lift the system board out of the system.

8

Upgrading Your System Board and Riser Board