4)UH8W.EXE
M3291/3295 Utility on Windows
UH8W.EXE depends on the Intel IPMI Reference Driver. So users must install it when using this utility.
About Intel IPMI Reference Driver installation, please refer to M3291/3295 FAQ.
1.LAN Configuration
1)IP Address
Users can set M3291/3295 IP Address as they want. Following is the instruction about how to set IP with Tyan utilities.
“uh8d /ip=xxx.xxx.xxx.xxx” “./uh8l
2)M3291 MAC Address
Normally user need not set MAC address, but users need check if the MAC address is right.
For Intel 82551 and 82546 NIC, M3291 use the same MAC address with system OS. Tyan IPMI enabled BIOS will load it automatically. If not, user can set it manually
For Broadcom 5704 and 5721 NIC, M3291 use the different MAC address with system OS. Every M3291 will be assigned one unique MAC when production. When users flash firmware, parameter “imac” will load this MAC from M3291 and write to LAN Configuration.
3)M3295 MAC Address
M3295 uses dedicated management NIC. So user need not set MAC address also. Parameter “imac” is Tyan utility also can be used to load M3295 MAC and write to LAN Configuration.
4)Net Mask, Gateway and Broadcast ARP Users need check if these parameter are correct.
If use Intel 82551 and 82546 as IPMI NIC, Broadcast ARP must be enabled
5)DHCP
23
http://www.tyan.com