Sensor Data Record (SDR)
Each sensor has its own corresponding characteristics. They are built according to IPMI standard to provide users the most information possible about a sensor. Details such as measuring units and calibration factors are available while they are not provided in traditional hardware monitoring systems.
SDR is specific to motherboard. Tyan provides a utility to easily upgrade the BMC firmware to support each motherboard model.
System Event Log (SEL)
A complete history of system events such as POST events are stored and secured in
Field Replaceable Unit Information Storage (FRU)
Chassis, Board, Product and other important service information are stored and secured in an area generally known as FRU.
Upgrade BMC Firmware
The BMC supports Firmware Flash through IPMI firmware commands. The Firmware is stored in boot block flash part. The boot block section code is normally programmed in- factory and it provides protection against accidental flash failure or power loss.
BMC Firmware may be upgraded from a remote console running Tyan System Operator (TSO). See TSO section for details.
“Always Ready”
SMDC runs on
Tyan System Operator ™ (TSO)
TSO is a software tool created specifically for
Software Information for further details.
Standard or OEM Drivers
M3291/3295 can use standard IPMI driver on Windows on LINUX.
Tyan may provide driver support for other third party software at request. Contact your Tyan support representative for more details.
10
http://www.tyan.com