USB HID Keyboard Emulation Swipe Reader
TRACK_DATA_SEND_FLAGS PROPERTY
Property ID: | 4 |
Property Type: | Byte |
Length: | 1 byte |
Get Property: | Yes |
Set Property: | Yes |
Default Value: | 63 (hex) |
Description: | This property is defined as follows: |
0
SS
ES LRC
0
LC
Er 
Er
SS0 – Don’t send Start Sentinel for each track
1 – Send Start Sentinel for each track
ES | 0 | – Don’t send End Sentinel for each track |
| 1 | – Send End Sentinel for each track |
LRC | 0 | – Don’t send LRC for each track |
| 1 | – Send LRC for each track |
| Note that the LRC is the unmodified LRC from the track data. To verify the LRC | |
| the track data needs to be converted back from ASCII to card data format and the | |
| start sentinels that were modified to indicate the card encode type need to be | |
| converted back to their original values. | |
LC | 0 | – Send card data as upper case |
| 1 | – Send card data as lower case |
| Note that the state of the Caps Lock key on the host keyboard has no affect on | |
| what case the card data is transmitted in. | |
Er | 00 – Don’t send any card data if error | |
| 01 – Don’t send track data if error | |
| 11 – Send ‘E’ for each track error | |
This property is stored in
18
