Section 4. USB Communications
This property is stored in non-volatile EEPROM memory so it will not change when the unit is power cycled. When this property is changed, the unit must be power cycled to have these changes take effect. If a value other than the default value is desired, it can be set by the factory upon request.
PRE_CARD_CHAR PROPERTY
Property ID: | 11 (0B hex) |
Property Type: | Byte |
Length: | 1 byte |
Get Property: | Yes |
Set Property: | Yes |
Default Value: | 0 |
Description: | This character is sent prior to all other card data. If the value is 0 no character |
| is sent. If the value is in the range 1 – 127 then the equivalent ASCII |
| character will be sent. |
This property is stored in non-volatile EEPROM memory so it will not change when the unit is power cycled. When this property is changed, the unit must be power cycled to have these changes take effect. If a value other than the default value is desired, it can be set by the factory upon request.
POST_CARD_CHAR PROPERTY
Property ID: | 12 (0C hex) |
Property Type: | Byte |
Length: | 1 byte |
Get Property: | Yes |
Set Property: | Yes |
Default Value: | 0 |
Description: | This character is sent after all other card data. If the value is 0 no character is |
| sent. If the value is in the range 1 – 127 then the equivalent ASCII character |
| will be sent. |
This property is stored in non-volatile EEPROM memory so it will not change when the unit is power cycled. When this property is changed, the unit must be power cycled to have these changes take effect. If a value other than the default value is desired, it can be set by the factory upon request.
