
ECM
Ethernet Communication Module
OVERVIEW
The ECM (Ethernet Communication Module) is a serial to ethernet converter that enables CEM serial communication devices (such as the S600s reader range, InfoProx reader and the DCM 150), to connect to the AC2000 central system via an Ethernet LAN.
A chain of up to 16 RS485 CEM devices can be connected to a single ECM (up to a maximum distance of 1.2 KM). This provides a cost effective means of connecting groups of serial readers to the AC2000 system from a single Ethernet point.
Simply load the software & configuration file supplied on the CD, and enter the network details.
Ethernet Communication Module
FEATURES
•Low cost serial to ethernet converter
•RS485 connection for multi- dropping up to 16 CEM serial devices on one chain
•10/100Mbps Ethernet through an
RJ45 connection
•Configuration connection with
Tibbo Device Server Toolkit
•Board only version available to support existing CEM legacy installations that use NCN’s
•Transparent connection between the CEM serial devices and the AC2000 Lite controller or the AC2000 SE Ethernet reader controller (RTC)
www.cemsys.com