Tyco Electronics P7100IP - page 32

MM101332V1, Rev. K
10.4 MODIFY SCAN LIST
10.4.1 System Model
1. Press  to toggle scan OFF and verify is not displayed.
2. Select group or channel.
3. Press  once to remove group or channel from list.
4. Press  once to add as a normal group or channel.
Press  twice to add as a Priority 2 group.
Press  three times to add as a Priority 1 group.
5. Press  to re-start scanning.
10.4.2 Scan Model
1. Press  to toggle scan OFF and verify is not displayed.
2. Select group or channel.
3. Press  once to remove group or channel from the list.
4. Press  once to add as a normal group or channel.
Press  twice to add as a Priority 2 group.
Press  three times to add as a Priority 1 group.
5. Press  to re-start scanning.
10.5 NUISANCE DELETE (SYSTEM MODEL)
A channel can temporarily be deleted from the scan list if it is not the currently selected channel.
1. Turn Scan ON.
2. When the radio receives a call on the channel, press the . The channel is removed from the scan
list until the radio is power cycled.
10.6 BACKLIGHT ON/OFF
1. Press  to access the menu.
2. Press   to scroll through menu until “BCKLGHT” appears.
3. Press  to select Backlight menu.
32