MM101332V1, Rev. K
14 OPERATION FOLLOWING WATER CONTACT
If the P7100IP model radio has been immersed in water or if the microphone air path or speaker grill
become clogged with water, follow instructions under “Radio Microphone” and “Radio Speaker” sections
to assure the highest quality transmitted and received messages.

14.1 RADIO MICROPHONE

In the event the P7100IP microphone air path becomes clogged with water, blow two quick successive
breaths of air directly into the radio microphone air hole. Refer to Figure 14-1. This will help to clear any
water trapped in the microphone air path and allow the microphone to function properly.
Figure 14-1: Radio Microphone

14.2 RADIO SPEAKER

To assure the user receives the highest quality receive audio possible after the radio has contacted water
or been immersed, it may be necessary to clear excess water from the speaker cavity and grill. The
speaker grill has been designed for easy drainage. To facilitate maximum drainage and the highest quality
speaker output, shake the radio vigorously with speaker grill face down.
58