Tyco Electronics P7100IP - page 47

MM101332V1, Rev. K

SYSTEM MODEL

1. To select a pre-stored individual phone number, enter the individual call mode using the  key. is

displayed. Then scroll through the list of stored numbers using the  or  key.

2. Press the PTT button; when the radio is clear to transmit, turns ON, turns OFF and the channel

access tone sounds. Line one shows the called individual's name if found in the list of stored

individuals or LID followed by the logical ID number of the unit being called. The message *INDV*

displays on line two.

SCAN MODEL

1. To select a pre-stored individual number, enter the menu mode by pressing the  key. Scroll through

the mode list using the  or  key.

2. Press . is displayed. Scroll through the list of stored phone numbers using the  or  key

until the desired number is displayed. Press .

3. Press the PTT button; when the radio is clear to transmit turns ON, turns OFF and the channel

access tone sounds. Line one shows the called individual's name or LID. The message *INDV*

displays on line two.

11.4.2.2 Direct Dial Individual Calls (System Model Only)

The following procedure describes how to initiate and complete a Direct Dial Individual Call.

1. The individual call ID is not stored in the pre-stored list of call IDs but the individual unit ID is

known, it can be entered directly from the keypad.

2. Press and hold the PTT button to transmit. will turn ON, will turn OFF, and the channel access

tone will sound. Line one shows the called individual's ID followed by the logical ID number of the

unit being called. The message *INDV* displays on line two. Proceed talking into the microphone.

11.4.3 Call Storage Lists

There are two lists available for call storage in the P7100IP series radios, the calls received list (1 - 10)

and the personality list (1 - 99 as defined by the user). When the individual call mode is entered by

pressing , the calls received list is available. The user can toggle to the personality list by selecting

any index other than 0 or toggle between the two lists by pressing the  key. If wrap is enabled, the

calls received list wraps on itself and not into the other list.

47

Contents

Main MM101332V1, Rev. K MANUAL REVISION HISTORY 2 Page Page Page Page 1 SAFETY TRAINING INFORMATION 1.1 RF EXPOSURE GUIDELINES 1.2 ELECTROMAGNETIC INTERFACE/COMPATIBILITY 2 SAFETY SYMBOL CONVENTIONS MM101332V1, Rev. K 3 OPERATING TIPS 3.1 EFFICIENT RADIO OPERATION 3.1.1 Antenna Care and Replacement MM101332V1, Rev. K 3.1.2 Electronic Devices 3.1.3 Aircraft 3.1.4 Electric Blasting Caps 3.1.5 Potentially Explosive Atmospheres 4 MARITIME CHANNELS MM101332V1, Rev. K 5 BATTERIES 5.1 CONDITIONING NIMH BATTERY PACKS 5.2 CONDITIONING NICD BATTERY PACKS 5.3 ADDITIONAL INFORMATION 5.4 CHANGING THE BATTERY PACK 5.5 BATTERY DISPOSAL 6 INTRODUCTION 6.1 WATER RESISTANCE 7 OPTIONS AND ACCESSORIES DESCRIPTION PART NUMBER Page Page MM101332V1, Rev. K 8.1 CONTROLS 8.1.1 Buttons and Knobs MM101332V1, Rev. K 8.1.2 Keypad (Scan and System Models Only) Primary Function: Accesses the pre-stored menu. The Figure 8-5: Scan Radio Front Panel Page MM101332V1, Rev. K 8.2 DISPLAY 8.2.1 Radio Status Icons Table 8-1: Display Descriptions MM101332V1, Rev. K 8.2.2 Tri-Color LED 8.2.3 Status Messages MM101332V1, Rev. K MESSAGE NAME DESCRIPTION 8.3 ALERT TONES 8.4 UNIVERSAL DEVICE CONNECTOR (UDC) 9 CONVENTIONAL OPERATION 9.1 RECEIVING A CALL 9.2 SENDING A CALL MM101332V1, Rev. K 10 BASIC OPERATION 10.1 TURNING ON THE RADIO 10.2 SYSTEM SELECTION 10.3 GROUP/CHANNEL SELECTION or to scroll through the group list. The display registers the new group Page Page Page Page Table 10-1: Menu Item Information MM101332V1, Rev. K 10.12 DIGITAL VOICE OPERATION 10.12.1 Clear Mode 10.12.2 Digital Mode MM101332V1, Rev. K 10.12.3 Private Mode MM101332V1, Rev. K 10.12.4 Private Operation Page 11 TRUNKED OPERATION Page MM101332V1, Rev. K 11.1.3 Deleting Groups from a Scan List 11.2 SCANNING TRUNKED SYSTEMS 11.2.1 Wide Area System Scanning Page MM101332V1, Rev. K 11.3 EMERGENCY OPERATION 11.3.1 Receiving an Emergency Call 11.3.2 Declaring an Emergency Call 11.4 INDIVIDUAL CALLS 11.4.1 Receiving and Responding to an Individual Call (Trunked Mode Only) Page Page Page MM101332V1, Rev. K 11.5.3 Dual-Tone Multi-Frequency: Overdial/Conventional Mode Page MM101332V1, Rev. K 11.7 STATUS/MESSAGE OPERATION 11.7.1 Status Operation 11.7.2 Message Operation 11.7.3 Dynamic Regroup Operation REGRP_0x 11.8 PORTABLE DATA 11.8.1 Displays 11.8.2 DATA OFF Operation 11.8.3 DATA ON Operation MM101332V1, Rev. K 11.9 PAGE (P25 TRUNKING ONLY) Page MM101332V1, Rev. K 12 PROJECT 25 (P25) CONVENTIONAL OPERATION 12.1 GROUP CALLS IN P25 MODE 12.1.1 Transmitting a Group Call 12.1.2 Receiving a Group Call 12.2 INDIVIDUAL CALLS IN P25 MODE 12.3 EMERGENCY GROUP CALLS IN P25 MODE 12.3.1 Declaring an Emergency Group Call 12.3.2 Receiving an Emergency Group Call 13 RADIO TEXTLINK OPERATION (EDACS ONLY) 14 OPERATION FOLLOWING WATER CONTACT 14.1 RADIO MICROPHONE 14.2 RADIO SPEAKER 15 IMMERSIBLE P7100IP PREVENTIVE MAINTENANCE 15.1 TECHNICAL ASSISTANCE IMMERSIBLE P7100 16 BATTERY WARRANTY 17 WARRANTY