MM101332V1, Rev. K
Figure 8-6: System Radio Front Panel
KEY FUNCTION
Same as Scan Model.
Same as Scan Model.
Selects a specific system. If the rotary knob is used to
select the system and more than 16 systems are
programmed in the radio, the key is used to select
additional banks (groupings) of systems.
1-9, *, 0, # These keys are used to place telephone interconnect and
individual (unit-to-unit) calls. The keys operate like a
normal telephone keypad.
Selects a specific group.
Turns the Scan operation ON and OFF.
Enables or disables Private Mode for the
system/group/channel displayed.
Adds groups or channels from the currently selected
system to the Scan list.
Status. Access to the status list (0-9). The Status key
permits the transmission of a pre-programmed status
message to a P25 Trunked or EDACS site.
Message. Access to the message list (0-9). The Message
key permits the transmission of a pre-programmed
message to a P25 Trunked or EDACS site.
Deletes selected groups or channels of the currently
selected system from the Scan list.
Places telephone interconnect calls.
Initiates individual calls.
23