Installation & Service Manual

TLM, TLF, TLD

3.Apply two heavy beads of caulking compound from the Filler Kit to the end of case at dotted (. . .) and dashed (- - -) lines. Proper caulking provides good case refrigeration and sanitation.

4.Push cases tightly together making sure the pull-ups are aligned.

5.Adjust legs or add shims under the end pedestals, as required. Check leveling at top of the case and on top of the front cladding.

CAUTION

Do not drill or use other holes through the case end for pull-ups. This may deform the case end and could cause joint leaks and/or poor refrigeration.

6.Position pull-up bolts and mounting hard- ware at pull-up locations (A and B). Do not tighten any pull-up hardware until all of it has been installed. Tighten all pull-up hardware equally starting at point A and finishing at point B. Do not overtighten.

Lift Front Glass Leveling Instructions

Accurate leveling is critical for the proper operation of the lift glass on this case.

In some instances, setting the case on an apparently level floor can cause the lift glass to fit improperly. If there is any twist in the body, it could cause the lift glass not to fit or work properly.

The emphasis when leveling this case must be on making sure the lift glass works and seals properly.

The case should be leveled across the top (1), close to the hinge, and on the top of the front cladding (2). A 4 foot level is recommended, and both places should be level! This will enable the lift glass to fit and work properly.

If the lift glass still doesn’t close or line-up properly, adjust the legs at the case corners or shimm the pedestals. Leg adjustment or shimming will ensure proper operation and alignment of the lift glass.

The handle on the lift glass must rest evenly on the front cladding. Proper lift glass sealing is essential for good product refrigeration.

NOTE

Do not anchor the base to the floor or enclose the case until the lift glass is fitting properly and working correctly.

September, 2004

Page 9

Page 8 Page 10
Page 9
Image 9
Tyler Refrigeration TLF, TLD, TLM service manual Lift Front Glass Leveling Instructions
Page 8 Page 10

TLM, TLD, TLF specifications

Tyler Refrigeration is a recognized leader in the refrigeration industry, providing innovative solutions aimed at enhancing energy efficiency and performance. Among their suite of products, the TLF, TLD, and TLM series stand out for their cutting-edge features and technologies.

The TLF series is particularly designed for accommodating large quantities of perishable goods. One of its key characteristics is the use of advanced insulation materials that not only enhance thermal efficiency but also reduce energy consumption. The TLF units come equipped with a user-friendly digital display that allows easy monitoring and precise temperature control. Additionally, the refrigeration system uses environmentally friendly refrigerants, ensuring compliance with modern sustainability standards.

The TLD series is optimized for versatility in commercial applications. These units are characterized by their adjustable shelving, which allows for flexible storage configurations. Moreover, the TLD series features a robust build quality, ensuring durability in high-traffic environments. An integrated energy management system is a highlight of the TLD line, providing real-time energy consumption data and helping operators to better understand their usage patterns. This feature not only aids in cost-saving measures but also aligns with broader efforts for environmental sustainability.

The TLM series focuses on maximizing space efficiency without sacrificing performance. What separates TLM from other models is its compact design, which is ideal for establishments with limited space such as convenience stores and small restaurants. The units utilize a state-of-the-art cooling technology, which guarantees even temperature distribution throughout the interior. The TLM series also incorporates smart technology, enabling remote monitoring and diagnostics. This capability allows operators to receive alerts for any temperature fluctuations or mechanical issues, ensuring the safety of stored products.

All three series feature a sleek design, allowing them to blend seamlessly into various environments, from grocery stores to industrial kitchens. Tyler Refrigeration has prioritized user convenience, ensuring that regular maintenance tasks can be performed easily, thus decreasing downtime.

In conclusion, Tyler Refrigeration's TLF, TLD, and TLM series showcase the company's commitment to innovation, efficiency, and reliability. With their unique features and modern technologies, these units not only enhance operational capabilities but also support sustainability in the refrigeration landscape. Whether for large-scale storage or compact applications, Tyler Refrigeration continues to set the standard for excellence in refrigeration solutions.
Top Page Image Contents