Wood Trim Finishing

WARNING

You MUST remove the wood trim from the unit for staining or finishing to prevent permanent damage to the inner liner of the unit. Allow stain or finish to dry thoroughly (at least 24 hours for each coat) following the product manufacturer’s instructions before reinstallation. Not following this warning may cause the inner liner of the unit to have a permanent odor, which the warranty will not cover.

U-Line products featuring wine storage include wood-trimmed wine racks.

Models with wood colored wood trim come factory coated with a clear vinyl sealer without a finish coat applied, which will sufficiently protect the wood in normal use. You may coat the trim on the racks with stain or a final finish following these guidelines. If using custom wood trim also follow these guidelines.

If staining the trim, stain before applying any final finish. Review the following staining and final finish application and final finish-only application guidelines when staining or sealing the wood to ensure proper adhesion and durability of the finish.

NOTE: On glass door models the stain may look darker with the door closed looking through the glass.

Staining and final finish application:

IMPORTANT

DO NOT use oil-based stains on wood trim. Vapors from oil-based stains will permanently penetrate the liner and will not dissipate over time.

1.Remove all screws securing wood trim to interior parts, and remove the trim from the cabinet interior.

2.Lightly sand and clean wood.

3.Apply Minwax® Water-Based Wood Stain to wood with a synthetic bristle brush or a foam applicator. Allow stain to penetrate about three minutes. Before the stain is dry, take a stain dampened rag and remove any excess stain remaining. Wipe towards the grain with medium pressure to achieve the desired stain color.

4.After two hours, repeat step 2. This will even out the color of the wood.

5.Allow stain to dry for a minimum of three hours before applying the final finish.

6.If desired, sand the wood with very fine sandpaper to smooth the surface after staining.

7.Remove all dust from the wood, and apply one coat of Minwax® Polycrylic® Protective Finish using a synthetic bristle brush to the wood. Apply this finish in a thin coat following towards the grain. Apply the finish to the back and sides of the wood first, and allow it to dry for two hours. Apply the finish to the front side of the wood next, and allow it to dry for two hours. Sand with very fine 220 grit sandpaper. Apply two morel coats of finish in the same manner, but do not sand the trim after applying the final third coat.

8.Allow the final coat to dry for 24 hours before reinstalling the trim to the cabinet interior parts.

Final finish-only application:

1.Remove all screws securing wood trim to interior parts, and remove the trim.

2.Lightly scuff sand the wood trim with 280 or finer grit sandpaper.

3.Remove sanding dust with a clean, dry cloth.

4.The factory-applied seal is compatible with almost all finishes. A low odor, water clean up, quick-drying finish such as Minwax® Polycrylic® Protective Finish is recommended (Minwax® Polycrylic® is an ultra fast-drying water-based finish). Apply a thin coat of a clear, protective finish, following the container label directions.

5.Lightly sand and reapply if desired.

Allow the final coat to dry for 24 hours before reinstalling the trim to the cabinet interior parts.

U-Line Wine Guide

11

Page 12 Page 14
Page 13
Image 13
U-Line 1175WC manual Wood Trim Finishing, Staining and final finish application
Page 12 Page 14

1175WC specifications

U-Line has long been a leader in the realm of premium refrigeration, and their U-Line 1115WC and 1175WC models have set a new standard for versatility and performance in compact wine coolers. Designed for wine enthusiasts, these models encapsulate a harmonious blend of style, temperature control, and innovative features that bring elegance to any space.

The U-Line 1115WC, with its 15-inch width, is perfect for smaller areas, making it an ideal choice for apartments, kitchens, or home bars. In contrast, the U-Line 1175WC, slightly wider at 17.5 inches, provides additional storage capacity without compromising on aesthetics. Both models boast a sleek, stainless steel frame and a glass door that not only showcases the wine collection but also adds a modern touch to any decor.

A standout feature of these wine coolers is their advanced cooling technology. U-Line employs a dual-zone cooling system, allowing you to set different temperatures for red and white wines, ensuring ideal preservation conditions. The temperature can be adjusted within the range of 34°F to 65°F, catering to various preferences for wine serving temperatures.

For those who appreciate a quiet environment, both models are engineered with a remarkably low decibel level, ensuring minimal operational noise. This feature makes them perfect for integration into social spaces, where conversation and ambience are important.

Another notable characteristic is the adjustable shelving system. Both wine coolers come with removable, natural wood shelves that can accommodate bottles of varying sizes. The shelves are designed to prevent bottles from rolling while providing easy access. With the capacity to hold up to 24 bottles in the 1115WC and up to 30 bottles in the 1175WC, storage is both efficient and organized.

The U-Line 1115WC and 1175WC also come equipped with a digital control panel, allowing users to easily monitor and set the internal temperature. The soft LED lighting serves to enhance visibility while showcasing your wine collection without affecting the wine’s quality.

In conclusion, the U-Line 1115WC and 1175WC wine coolers combine functionality, stylish design, and advanced technology to deliver an exceptional wine storage experience. Whether you're a novice collector or a seasoned sommelier, these models offer the perfect solution for preserving and displaying your cherished wines.
Top Page Image Contents