1

Install bottom hinge:

1.If you have a plate hinge, reorient the pivot screw so it protrudes the opposite direction form the hinge. Remove the pivot screw from the hinge. Turn the plate over and reinstall the screw.

2.Align hinge outer edge with cabinet. For models with a plate hinge, the flat edge of the hinge alignes with the outer edge of the cabinet.

Install two or three screws, depending on model. Replace nuts if used.

Prepare door for reinstallation:

For black or white doors:

1.Remove plastic hole plug from top of door handle and reinstall on opposite side.

2.Remove plastic hinge bushing on bottom of door and reinstall on opposite side. Clean out bushing hole in door bottom with a screwdriver if necessary.

 

3

 

 

 

4

 

 

2

 

Install top hinge, and door:

1

1.

Reorient the pivot screw so it protrudes the opposite

 

 

 

 

direction from the hinge. Remove the pivot screw from the

 

 

 

hinge. Turn the plate over and reinstall the screw.

 

 

2.

Hold door to keep it from falling.

 

Prepare door for reinstallation:

3.

Lift the door on to the bottom hinge.

 

For stainless steel models with glass doors:

4.

Align flat edge of the hinge with the outer edge of the unit.

 

3. Stainless glass doors are flipped upside down to be reversed.

5.

Install three or four screws, depending on model.

 

4. Lay the door on it’s side. Remove the plastic hole plug (1) and

Align and adjust the door:

 

install in the corner opposite of where it was removed.

1.

Align and adjust the door, see DOOR ALIGNMENT AND

 

 

 

5. Remove the plastic hinge bushing (2) and install in the corner

 

ADJUSTMENT above.

 

opposite of where it was removed.

Install grille:

 

 

6. Remove the U-Line nameplate (3) from door. This will reveal

Install the grille, see MAINTENANCE section of this guide.

mounting holes for the door actuator bracket.

 

7.Remove door actuator (4) from door. Be sure to only remove the two screws holding the actuator to the door. Reinstall the actuator (4) on the opposite end of the door where the nameplate was removed.

8.Install new nameplate where the actuator assembly was removed.

9.Install screws into holes on opposite side, where the hinge was removed. Replace nuts if used.

16

U-Line Standard Door Alignment and Reversal

Page 17 Page 19
Page 18
Image 18
U-Line 1175WC Install bottom hinge, Prepare door for reinstallation For black or white doors, Install top hinge, and door
Page 17 Page 19

1175WC specifications

U-Line has long been a leader in the realm of premium refrigeration, and their U-Line 1115WC and 1175WC models have set a new standard for versatility and performance in compact wine coolers. Designed for wine enthusiasts, these models encapsulate a harmonious blend of style, temperature control, and innovative features that bring elegance to any space.

The U-Line 1115WC, with its 15-inch width, is perfect for smaller areas, making it an ideal choice for apartments, kitchens, or home bars. In contrast, the U-Line 1175WC, slightly wider at 17.5 inches, provides additional storage capacity without compromising on aesthetics. Both models boast a sleek, stainless steel frame and a glass door that not only showcases the wine collection but also adds a modern touch to any decor.

A standout feature of these wine coolers is their advanced cooling technology. U-Line employs a dual-zone cooling system, allowing you to set different temperatures for red and white wines, ensuring ideal preservation conditions. The temperature can be adjusted within the range of 34°F to 65°F, catering to various preferences for wine serving temperatures.

For those who appreciate a quiet environment, both models are engineered with a remarkably low decibel level, ensuring minimal operational noise. This feature makes them perfect for integration into social spaces, where conversation and ambience are important.

Another notable characteristic is the adjustable shelving system. Both wine coolers come with removable, natural wood shelves that can accommodate bottles of varying sizes. The shelves are designed to prevent bottles from rolling while providing easy access. With the capacity to hold up to 24 bottles in the 1115WC and up to 30 bottles in the 1175WC, storage is both efficient and organized.

The U-Line 1115WC and 1175WC also come equipped with a digital control panel, allowing users to easily monitor and set the internal temperature. The soft LED lighting serves to enhance visibility while showcasing your wine collection without affecting the wine’s quality.

In conclusion, the U-Line 1115WC and 1175WC wine coolers combine functionality, stylish design, and advanced technology to deliver an exceptional wine storage experience. Whether you're a novice collector or a seasoned sommelier, these models offer the perfect solution for preserving and displaying your cherished wines.
Top Page Image Contents