Bosch Appliances VJR SERIES installation manual Installing the Camera to the Mounting Plate

74 en Installing a Pipe Mount AutoDome Junior HD

7.1.3Installing the Camera to the Mounting Plate

To install the camera to a ceiling mount using the supplied mounting plate, do the following:

1.Route wires on side of mounting plate with crescent shaped cut-out.

2.Attach grounding wire from unit to mounting cap.

3.Attach user supplied ground to junction box.

4.Connect the mating connectors with the flying leads to the user supplied wiring (see the Section 8 Preparing the Wiring, page 77 for wiring information).

5.Unlock the single safety locking screw on the base of the unit using the user-supplied Allen wrench.

Figure 7.7 Unlock Safety Locking Screw

6.Plug the matching connectors from the camera into the mating connectors from the ceiling.

7.Align wires on side of mounting plate with crescent shaped cut-out.

8.Attach the camera to the mounting plate by inserting the vertical tab on the plate (item 1, below) into the recessed slot on the top of the camera dome (Item 3) to the right of the safety locking screw (item 2).

F.01U.275.803 6.0 2012.11 Installation Manual Bosch Security Systems, Inc.