AutoDome Junior HD | Installing a Surface Mount en 27 |
|
|
2.Use the
Figure 4.5 Location of M4 or #10 pan head screws
3.Drill the four (4) holes in the installation location. Use a minimum screw length of 10 mm (.39 in.).
4.Prepare the surface so that it can support a maximum load of 11.33 kg (25 lbs).
5.Thread the four (4) 3.97 mm I.D. by Ø1.78 mm
6.Ensure that the gasket is attached to the retaining ring. If the gasket and the retaining ring are separate:
a.Locate the flat side of the gasket and the recessed side of the retaining ring.
Bosch Security Systems, Inc. | Installation Manual | F.01U.275.803 6.0 2012.11 |