Bosch Appliances VJR SERIES installation manual Clamp Drive Screws and Plates

60 en Installing a Recessed Mount AutoDome Junior HD

NOTICE!

If you need to install the VJR-A3-SP Support Bracket, refer to the guide included with the bracket. Once the bracket is installed, continue with the next section.

12.Loosen the two clamp drive screws (item 1, below) so that the clamping plates (item 2) move freely.

Figure 6.15 Clamp Drive Screws and Plates

13.Insert the bracket through the hole in the ceiling. Slide clamps out and down so that the ceiling is captured in between the clamps and the bracket flange. The ceiling must have a maximum thickness of 41.7 mm (1.64 in.) and a minimum thickness of 12.7 mm (0.50 in.).

Figure 6.16 Attach Recess Mount to Ceiling

F.01U.275.803 6.0 2012.11 Installation Manual Bosch Security Systems, Inc.