AutoDome Junior HD | Using the IP Interface en 93 |
|
|
The AutoDome Junior HD defaults are as follows:
–IP Address: 192.168.0.1
–Subnet Mask: 255.255.255.0
–Gateway IP Address: 0.0.0.0
The following sections provide instructions about installing the software necessary to view images over an IP connection, configuring the IP network settings and accessing the AutoDome Junior IP images from a Web browser.
11.4.1Changing the Network Settings
The AutoDome Junior HD has a default IP address of 192.168.0.1. To change the IP address or any network settings, you can use the Configuration Manager software or the AutoDome Junior IP server.
NOTICE!
Contact your local network administrator for a valid IP address, Subnet Mask, and a Gateway IP Address.
Using the Configuration Manager
Configuration Manager is an optional network utility provided on the Bosch Security Systems Web site. Use the Configuration Manager Manual to make any configuration changes.
NOTICE!
Depending on the PC network security settings, the user may have to add the new IP address to the browser’s trusted sites list for the AutoDome Junior HD controls to operate.
Using the AutoDome Junior HD Web Server
To configure the camera using the AutoDome Junior HD server, do the following:
1.Set the IP address on the PC to 192.168.0.10 to ensure that the PC and the IP AutoDome are on the same Subnet.
2.Launch Microsoft Internet Explorer and navigate to the following URL: http://192.168.0.1
The Web browser opens the LivePage for the AutoDome Junior HD; a security warning message is displayed.
Bosch Security Systems, Inc. | Installation Manual | F.01U.275.803 6.0 2012.11 |
