Bosch Appliances VJR SERIES installation manual Standard recording

146 en Configuring the AutoDome Junior HD AutoDome Junior HD

1.Click one of the tabs to edit the corresponding profile.

2.If necessary, click the Default button to return all settings to their default values.

3.Click the Copy Settings button if you want to copy the currently visible settings to other profiles. A new window will open and you can select the profiles in which you want to copy the settings.

4.For each profile, click the Set button to save the settings in the unit.

Standard recording

Here you can select the mode for standard recordings.

f you select Continuous, the recording proceeds continuously. If the maximum memory capacity is reached, older recordings will automatically be overwritten. If you select the Pre-alarmoption, the device uses a special recording mode for optimal usage of storage capacity: as soon as a time gap for alarm recording begins, a recording is continuously made on one segment, which is the size of a complete alarm sequence (pre- and post- alarm time).

This segment functions in a similar manner to a ring buffer and is overwritten until an alarm is actually triggered. Then, recording occurs on the segment only for the duration of the preset post-alarm time and a new segment is subsequently used in the same manner.

If you select Off, no automatic recording takes place.

CAUTION!

You can specify limitations for overwriting older recordings in Continuous mode by configuring the retention time (see Section 12.33 Retention Time, page 148).

F.01U.275.803 6.0 2012.11 Installation Manual Bosch Security Systems, Inc.