52 en Installing a Recessed Mount | AutoDome Junior HD |
|
|
6.Connect the mating connectors (supplied in the accessory kit) with the flying leads to the user supplied wiring (see the Section 8 Preparing the Wiring, page 77 for wiring information).
7.Plug the matching connectors from the camera into the mating connectors from the ceiling.
Figure 6.6 Match Connectors
1Locking Screw
2 Crescent Shape
3 Mounting Plate
4 Vertical Tab
8.Attach the camera to the mounting plate by inserting the vertical tab on the plate (item 1, below) into the recessed slot on the top of the camera dome (Item 3) to the right of the safety locking screw (item 2).
Note: Do not loosen the three brass buttons (item 4). These brass buttons engage the slotted tabs (item 5) on the mounting plate.
F.01U.275.803 6.0 2012.11 | Installation Manual | Bosch Security Systems, Inc. |