172 en Configuring the AutoDome Junior HD | AutoDome Junior HD |
|
|
UPnP
You can activate the universal plug and play function (UPnP). When activated the camera reacts on requests from the network and will be registered automatically as a new network device on the inquiring computers. The access to the camera is then possible via the Windows file explorer, and without knowledge of the camera’s IP address.
NOTICE!
In order to use the UPnP function on a computer with Windows XP or Windows Vista, the Universal Plug and Play Device Host and the SSDP Discovery services must be activated.
This function should not be used in large installations due to the large number of registration notifications.
TCP Metadata Input
The device can receive data from an external TCP sender, for example an ATM or POS device, and store it as metadata. Select the port for TCP communication. Select Off to deactivate the TCP metadata function.
Sender IP Address
Enter the IP address of the TCP metadata sender here.
NTCIP
Specifies a set of rules and protocols for organizing, describing and exchanging transportation management information between transportation management applications and transportation equipment such that they interoperate with each other.
Select a port for NTCIP and the Address from the appropriate
12.48Multicast
In addition to a 1:1 connection between an encoder and a single receiver (unicast), the AutoDome Junior HD can enable multiple receivers to receive the video signal from an encoder simultaneously. The device either duplicates the data stream
F.01U.275.803 6.0 2012.11 | Installation Manual | Bosch Security Systems, Inc. |