Bosch Appliances VJR SERIES installation manual AutoDome Junior HD Safety en

AutoDome Junior HD Safety en 9

7.Control adjustment - Adjust only those controls specified in the operating instructions. Improper adjustment of other controls may cause damage to the unit. Use of controls or adjustments, or performance of procedures other than those specified, may result in hazardous radiation exposure.

8.Overloading - Do not overload outlets and extension cords. This can cause fire or electrical shock.

9.Power disconnect - Units with or without ON/OFF switches have power supplied whenever the power cord is inserted into the power source; however, the unit is operational only when the ON/OFF switch is in the ON position. The power cord is the main power disconnect device for switching off the voltage for all units.

10.Power sources - Operate the unit only via the type of power source indicated on the label. Before proceeding, be sure to disconnect the power from the cable being connected to the unit.

–For battery powered units, refer to the operating instructions.

–For units supplied by an external power source, use only the recommended or approved power supplies.

–For limited power source units, this power source must comply with EN60950. Substitutions may damage the unit or cause fire or shock.

–For 24 VAC units, the VG4-A-PSUxx Power Supply is recommended to comply with EN 50130-4 Main Supply Voltage Dips and Short Interruption requirement and voltage applied to the unit's power input should not exceed +/- 10% or 21.6-26.4 VAC. User-supplied wiring must comply with local electrical codes (Class 2 power levels). Do not ground the supply at the terminals or at the unit's power supply terminals.

–If unsure of the type of power supply to use, contact your dealer or local power company.

Bosch Security Systems, Inc. Installation Manual F.01U.275.803 6.0 2012.11