Bosch Appliances VJR SERIES installation manual Attach surface mount to ceiling

AutoDome Junior HD Installing a Surface Mount en 29

1M3 – .5 x 6 Phillips flat head machine screws

(supplied with AutoDome Junior Outdoor Camera)

2Retaining ring with gasket

(supplied with AutoDome Junior Outdoor Camera)

3O-ring, 3.97 mm I.D. by Ø1.78 mm

(supplied with AutoDome Junior Outdoor Camera)

4User-supplied M4 or #10 pan head screws

8.Determine the side of the Surface Mount Adapter in which the external wires are to be routed and remove the plug from the knockout.

9.Apply a 1/2-inch (15-mm) NPS fitting to the chosen knockout. Ensure a water-tight fitting to maintain the IP Environmental Protection Rating for the unit.

10.Attach the Surface Mount Adapter to the surface using four

(4) user-supplied M4 or #10 pan head screws (screws not supplied). Use a minimum screw length of 10 mm (.39 in.). Note: For an outdoor installation ensure that the four (4)

3.97 mm I.D. by Ø1.78 mm O-rings are threaded onto the four (4) M4 or #10 user-supplied pan head screws. Refer to step 5.

Figure 4.7 Attach surface mount to ceiling

Bosch Security Systems, Inc. Installation Manual F.01U.275.803 6.0 2012.11