Bosch Appliances VJR SERIES Scene too bright, Scene too dark, Scene too noisy, Select Area

AutoDome Junior HD Configuring the AutoDome Junior HD en 159

Scene too bright

Activate this function if tampering associated with exposure to extreme light (for instance, shining a flashlight directly on the lens) should trigger an alarm. The average brightness of the scene provides a basis for recognition.

Scene too dark

Activate this function if tampering associated with covering the lens (for instance, by spraying paint on it) should trigger an alarm. The average brightness of the scene provides a basis for recognition.

Scene too noisy

Activate this function if tampering associated with EMC interference (noisy scene as the result of a strong interference signal in the vicinity of the video lines), as an example, should trigger an alarm.

Select Area

You can select the image areas in the reference image that are to be monitored. The video image is subdivided into 858 square fields. Each of these fields can be activated or deactivated individually.

NOTICE!

Select only those areas for reference monitoring in which no movement takes place and that are always evenly lit, as false alarms could otherwise be triggered.

1.Click Select Area to configure the sensor fields. A new window will open.

2.If necessary, click Clear All first to clear the current selection (fields marked yellow).

3.Left-click the fields to be activated. Activated fields are marked yellow.

4.If necessary, click Select All to select the entire video frame for monitoring.

5.Right-click any fields you wish to deactivate.

6.Click OK to save the configuration.

7.Click the close button X in the window title bar to close the window without saving the changes.

Bosch Security Systems, Inc. Installation Manual F.01U.275.803 6.0 2012.11