Bosch Appliances VJR SERIES installation manual Decoder, SSL encryption, Auto-connect

AutoDome Junior HD Configuring the AutoDome Junior HD en 153

NOTICE!

Refer to the destination unit documentation concerning image display options and available video outputs.

Decoder

Select a decoder of the receiver to display the alarm image. The decoder selected has an impact on the position of the image in a split screen. For example, you can specify via a VIP XD that the upper-right quadrant should be used to display the alarm image by selecting decoder 2.

SSL encryption

The data for the connection, for example the password, can be securely transmitted with SSL encryption. If you have selected the On option, only encrypted ports are offered in the Remote port parameter.

NOTICE!

Please note that the SSL encryption must be activated and configured at both ends of a connection. This requires the appropriate certificates to be uploaded onto the AutoDome Junior HD.

You can activate and configure encryption of the media data (video and metadata) on the Encryption page (see Section 12.47 Advanced, Page 170).

Auto-connect

Select the On option to automatically re-establish a connection to one of the previously specified IP addresses after each reboot, after a connection breakdown or after a network failure.

NOTICE!

In the default setting, Stream 2 is transmitted for automatic connections. Bear this fact in mind when assigning the profile (see Section 12.17 Encoder Profile, page 124).

Bosch Security Systems, Inc. Installation Manual F.01U.275.803 6.0 2012.11