AutoDome Junior HD | Preparing the Wiring en 79 |
|
|
8.2.1Power Connections to Indoor/Outdoor Cameras
WARNING!
The indoor or outdoor AutoDome Junior HD camera can accept power from the 24 VAC power input or from the Ethernet input. Ensure that the camera receives power from only one source.
Refer to Section 8.3 Ethernet Connection, page 81, for more information about connecting Power over Ethernet.
Figure 8.1 Power Cable
| Ref. # | Wire | Color |
| 1 | 24 VAC | Red |
| 2 | 24 VAC | Black |
| 3 | n/a | |
|
|
|
|
NOTICE!
The camera unit accepts 24 VAC, 1.2 A power only. Do not connect 120 V or 230 V to this camera.
To connect the power to indoor models:
1.Locate the cable assembly with a three (3) pin mating connector on one end and the red and black flying leads on the other end.
2.Connect one lead of the 24 VAC power source to the black wire.
3.Connect the other lead of the 24 VAC power source to the red wire.
4.Connect the green earth ground cable to a suitable grounded conduit.
Bosch Security Systems, Inc. | Installation Manual | F.01U.275.803 6.0 2012.11 |