AutoDome Junior HD | Configuring the AutoDome Junior HD en 131 |
|
|
12.19Privacy Masks
Privacy Masking is used to block out a specific area of a scene from being viewed. Masks can be configured as a gray area with four corners. You may define a total of 24 privacy masks.
NOTICE!
–The AutoDome disables the Privacy Mask feature if the
orientation of the camera is set to Inverted. Refer to Section 12.16 Installer Menu, page 123, for orientation settings.
–You cannot apply a privacy mask 70° (tilt direction) below the horizon.
To add a privacy mask to a scene:
1.Navigate to the scene in which you want to apply a privacy mask.
a.Click the View Control link.
b.Use the PTZ controls to view the scene.
2.Select the privacy mask number to apply to the scene.
The preview window displays a gray rectangle in the scene.
3.Click the Enable check box to activate the privacy mask. The privacy mask in the preview window changes to orange to indicate that the mask will appear in the video streams on the Livepage.
4.Select a mask color from the Pattern list box.
5.Place the cursor inside the privacy mask area in the preview window; then click and drag to move the privacy mask.
6.Place the cursor on a corner or on a side of the mask rectangle; then click and drag to expand or shrink the privacy mask area.
NOTICE!
Draw the mask 10% larger than the object to ensure that the mask completely covers the object as the AutoDome zooms in and out.
Bosch Security Systems, Inc. | Installation Manual | F.01U.275.803 6.0 2012.11 |
