U-Line manual Door Reversal, 2115WC and 2115WCOL, 2175WC and 2175WCOL

Door Reversal

ULIN_0015_A

Figure 18

All U-Line black units may be left- or right-hand opening. Stainless steel unit doors cannot be reversed. The doors are easily reversed by moving the hinge hardware to the opposite side. The top hinge hardware will be used on the bottom of the other side and the bottom hinge hardware will be used on the top of the other side (Figure 18).

To reverse the door:

1

2

ULIN_0003_A

Figure 19

1.Remove top hinge screw pin (Figure 19, 1) from door using a Phillips screwdriver. Remove door by tilting forward and lifting off bottom hinge pin.

1

ULIN_0002_A

Figure 20

2.Remove plastic screw plugs (three each, top and bottom) (Figure 20, 1) from new hinge location. Do not discard.

3.Remove top hinge (three screws) (Figure 19, 2) and reinstall hinge screw pin (Figure 19, 1).

1

ULIN_0005_A

Figure 21

4.Install the removed top hinge mount on opposite side BOTTOM (Figure 21).

1

ULIN_0004_A

Figure 22

16 2115WC and 2115WCOL, 2175WC and 2175WCOL