5.Remove pivot screw from top hinge, invert screw and reinstall pivot screw in top hinge (Figure 13). Do not install hinge on cabinet at this time.
ULIN_0107_A |
Figure 14
6.Remove bottom hinge from cabinet (four screws) and screws on opposite side of cabinet (Figure 14).
7.Remove pivot screw from bottom hinge, invert screw and reinstall pivot screw in hinge (Figure 13).
ULIN_0108_A |
Figure 15
8.Install bottom hinge on cabinet, opposite side, aligning flat edge of hinge with outer edge of unit (Figure 15). Partially tighten screws.
ULIN_0110_A |
Figure 17
10.Place door on lower hinge pin. Align flat edge of top hinge with outer edge of unit and fasten upper hinge to unit (four screws) (Figure 17). Partially tighten screws.
11.Adjust door to assure proper seal. Tighten upper and lower hinge screws securely.
12.Replace four plastic plugs removed in Step 3 into holes on top of unit. Replace screws in holes in bottom of unit on opposite side.
13.Reinstall grille to unit.
1
ULIN_0109_A
Figure 16
9.Relocate plastic spacer/bushing (Figure 16) on bottom of door to the opposite side. Clean out bushing hole in door bottom if necessary.
75F | 11 |