U-Line ADA15IM Product Registration Models Covered, Tools / Material Required, Exterior Cleaning

3 Inspect & Plan

Product Registration

You have received a carton containing your ice maker unit with a package inside containing a Use and Care Guide, a Product Registration Card, and a water line kit. Please complete and mail the Product Registration Card or register online at www.U- LineService.com. Once your unit is installed, keep the Use and Care Guide and this Installation Guide in a safe place for future reference.

Models Covered

This installation guide covers the following models

Tools / Material Required

•Screwdrivers — slotted and Phillips head

•1/4-inch thick door panel material and cutting tools (If installing a 1/4” Panel)

•1/4” Nut Driver

•5/16” Nut Driver

•Side Cutter

•Copper tubing cutter

•12” Level

•9/16” Open end wrench

•7/16” Open end wrench

•Pliers

•Copper tubing

A complete water hook up kit is also available for purchase from your dealer. Order U-Line Part No. WATERHOOKUP.

Exterior Cleaning

U-ADA15IMB-00 U-ADA15IMS-00 U-ADA15IMS-01 U-BI2115B-00 U-BI2115S-00 U-BI2115S-01 U-BI2115SOD-00 U-BI2115SOD-01 U-BI2115W-00 ULN-BI95B-00 ULN-BI95WH-00

ULN-BI98B-00 ULN-BI95WH-00 ULN-SP18B-03 ULN-SP18WH-03 ULN-SS1095FC-03 ULN-SS1095FD-03 ULN-SS1095NF-03 ULN-SS95-03 ULN-SS98-03 ULN-WH95TP-03

Black and White Models:

•Black and White surfaces may be cleaned with a mild detergent and warm water solution. Do not use solvent-based or abrasive cleaners. Use a soft sponge and rinse with clean water. Wipe with a soft, clean towel to prevent water spotting.

Stainless Models:

• Stainless door panels, handles and frames can discolor when

exposed to chlorine gas, pool chemicals, salt water or cleaners

with bleach.

• Keep your Stainless unit looking new by cleaning with a good

quality all-in-one stainless steel cleaner/polish on a monthly

basis. For best results use Claire Stainless Steel Polish and

Cleaner, which can be purchased from U-Line Corporation

(Part numbers 173348). Frequent cleaning will remove surface

contamination that could lead to rust. Some installations may

Please carefully follow the directions that apply to your unit and your intended design.

require cleaning on a weekly basis.

• Do not clean with steel wool or abrasive pads.

• Do not use cleaners that are not specifically intended

for stainless steel on stainless surfaces (this includes

glass, tile and counter cleaners).

• If any surface discolors or rust appears, clean it quickly with

Bon-Ami or Barkeepers Friend Cleanser and a non-abrasive

cloth. Always clean in the direction of the grain. Always finish

this process with Claire Stainless Steel Polish and Cleaner or

comparable product to prevent further problems.

WARNING

Rust that is allowed to linger can penetrate into the surface of the stainless steel and complete removal of the rust may not be possible.

U-Line Inspect & Plan 3