4.Locate the compression fit- ting and ferrule packed in the unit. Slide the compression fitting and ferrule over the 1/4 inch water supply line. Do not use thread sealing compound or tape. Using two wrenches, tighten the compression fitting on the supply line (see Figure 6).
UL134
Figure 6
5.Carefully bend the water sup- ply line into position and con- nect the line to the solenoid valve (see Figures 7 and 8). Avoid kinking the water sup- ply line.
POWER
CORD
WATER LINE | UL201 |
|
Figure 7
WATER LINE
UL204A
Figure 8
6.For recessed installations, allow extra water supply line length to provide slack for easy removal from the recessed area (see Figure 9). This will also safeguard against kinking the line.
UL200
Figure 9
11