User’s Manual

3.Place the two hook-hinges (locat- ed on the rear bottom side of the grille) on the front

lip of the unit base. Swing the grille up into posi- tion, aligning the grille and cabinet screw holes (see Figure 13).

4.Insert the screw,

being careful not to over tighten.

UL207

Figure 13

REVERSING THE DOOR

Depending upon the location of the unit, it may be desirable to change the side on which the door is mounted.

To reverse the door mounting, perform the following:

1.Remove grille (1 screw) (see

Figure 14).

2.Remove top hinge from cabi-

net (3 screws) (see Figure 15). Hold door to keep it from falling.

REMOVE SCREW

UL116

UL109

Figure 14

Figure 15

14